;------------------------------------------------------------------------------- ; ProVideo Parts List ;------------------------------------------------------------------------------- U1 - 74LS32 Quad OR-Gate (SOP-14) U2 - CD4050B Buffer (SOP-16) Q1,Q2 - 2N3904 (TO-92) C1,C2 - 220uF, 16V Electrolytic Capacitor (RAD-315) C3 - 1uF, 35V Tantalum Capacitor (RAD-197) C4,C6 - .1uF, 50V Ceramic Capacitor (C0603) C7,C8 - 10uF, 16V Tantaum Capacitor (C0805) D1 - BAT41 ST Schottky Diode (TH) R1 - 6.8KOhm Resistor (TH) R2 - 3.3KOhm Resistor (TH) R3 - 1.6KOhm Resistor (TH) R4 - 820Ohm Resistor (TH) R5,R6,R8,R10 - 75Ohm Resistor (TH) R7,R9 - 10Ohm Resistor (TH) R11,R12 - 2KOhm Resistor (TH) R13,R14 - 1.8KOhm Resistor (TH) RA - 18KOhm Resistor for NTSC Mixing, 6.8KOhm for PAL Mixing RC - 6.8KOhm Resistor (TH) RV1,RV2 - 10KOhm Potentiometer (X262) J1 - 8x1 2.54mm Female Header (Pin 5 Removed) J2 - 2x1 2.54mm Female Header J3 - 3x2 2.54mm Male Header J4,J5 - 4x1 2.54mm Male Right Angle Header J6 - 4x1 2.54mm Male Header (Pins 2,3 Removed) Additional headers must be mounted on the ProSystem board itself near the modulator and friends for the board to sit on. The headers can also be left out completely if you'd rather solder down the board permanently.